This machine is very safe under normal operation, avoid problems in the installation, use and maintenance process, please note the following, in order to avoid accidents. But it is impossible to anticipate all environmental precautions

The generator manually start: first test the alarm system , the control switch is in manual (MAN) position, the generator can start own.

Power factor 0.8. Can not, because the capacitor charge and discharge can cause small power fluctuation. And set oscillation.

Two generating unit and the machine use conditions? By what means to finish and machine work?

General description: the battery is a battery combination of many individuals, including many pieces of metal, immersed in a conductive fluid. Electrical energy from the battery of in chemical reaction produces, chemical reaction is reversible, so that means the repeatable battery charging and discharging.

Description: a design of advanced electronic control system device in the generator to control and monitor the machine. According to the different needs of different generator with several criteria of the control system. They include DKG series, ESM series automatic starting system, MRS series and IG-CU series and IG-CU-C series of advanced automatic starting system enhanced advanced automatic starting system.

General: mounted on the generator AC generator is brushless excitation type, it can be omitted on the slip ring and brush maintenance. The control system includes an automatic voltage regulator, protection circuit and the generator output monitoring necessary instrument.

General: the diesel generator power source, it is an industrial, heavy duty diesel engine, reliable performance, high efficiency. It is dedicated to the design, very suitable for driving the generator. This machine for 4 stroke or 2 stroke internal combustion compression-ignition engines and equipped with complete accessories, to provide reliable power.

A good repair maintenance is to ensure that the generator set the key to longevity. Repair and maintenance required by qualified technical personnel to carry out. The repair and maintenance should be recorded for this will contribute to the future arrangements repair and maintenance procedures.

In most installations, noise control becomes very important. There are a variety of methods are available to control the noise level.